概述

Summary

该设备可实现车轮轮辋端向和径向的跳动检测，为满足检测节拍要求，夹紧机构、顶升机构、压紧机构均采用气动执行元件，从而实现了汽车轮辋的快速夹紧与定位。

This equipment can realize test for radical run-out and axial run-out of wheel rim. To satisfy requirement to test tact, the clamping device, jacking device and pressing device all use pneumatic actuator, which can clamp and locate rim quickly.

工件从上一工序到达本工序，传送到预定位置,检测开关检测到工件,夹紧机构将工件送到检测位置下方，顶升夹紧机构将工件顶起并夹紧定位，压紧机构将工件压紧，伺服电机旋转带动工件旋转，检测机构检测工件，检测完毕后合格产品通过传送机构传送到下一工序，对于不合格产品可通过后面的分选机构分选。

The workpiece from last process of fitting-press machine to this process will be conveyed to the appointed position, workpiece will be detected by detecting switch and will be conveyed below detection position by clamping device. The jacking device will jack workpiece up, clamp it and locate. Pressing device will press the workpiece. Servo motor rotates to drive workpiece rotation. The testing device will test workpiece. After test the qualified product will be conveyed to next process by transmission device, and the unqualified one will be selected out by the selecting mechanism.

该设备实现了过程的自动化与检测数据的可视化，达到稳定产量、提高质量、降低消耗、高效实用的目的。

This equipment realizes automatically production process and visual testing data. It achieved target of constant production, quality improvement, consumption reduction and high efficiency and pragmatic function.

规格参数

Specification

设备结构简介

Equipment Structure Introduction

该设备包括控制系统、上料系统、检测系统和分选系统四大部分；主要由1传送机构、2夹紧机构、3顶升旋转机构、4压紧机构、5检测装置、6分选机构等组成；

This equipment can be divided into four parts: control system, feeding system, testing system and selecting system. It mainly consists of transmission device (1), clamping device (2), jacking-rotating device (3), pressing device (4), testing device (5), selecting device (6), etc., shown as below pictures.

可实现自动送料机构同生产线连接，该设备能自动将工件输送到预定工位，夹紧机构夹紧工件并输送到检测区，顶升机构定位找正并将工件抬起、压紧机构将工件压紧、顶升旋转机构带动工件旋转，检测装置在线检测。

Its automatically feeding device can be connected with production line. This equipment can convey workpiece to the appointed processing position automatically. Clamping device grips workpiece and conveys it to testing part. Jacking device locates and lifts workpiece up. Pressing device presses workpiece, jacking-rotating drives workpiece to rotate and testing device will do the online testing operation.